Allied-telesis AT-8350GB User Manual download pdf (Page 28)

Product Description

Expansion

Module

LEDs

The expansion module has an LED for each port. Use the Mode select

button located on the front panel of the AT-8350GB switch to toggle the

port LEDs to display port status. The LEDs can display a variety of

information, including link status, speed, and duplex mode.

Figure 13 Expansion Module Port LEDs

Table 7 describes the 10/100/1000 Mbps expansion module port LEDs.

2 1000 Base-T Module

LEDs

Table 7 10/100/1000 Mbps Expansion Module Port LEDs

LED State Description

LINK Flashing Green

A link with activity.

Steady Green A link with no activity.

OFF No link has been established.

100 Amber A 1000 Mbps link has been established

Green A 100 Mbps link has been established.

OFF A 10 Mbps link has been established.

FULL Green The port is in full-duplex mode.

OFF The port is in half-duplex mode and no data

collisions are occurring on the port

1. AT-A49 expansion module only.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 103 104

No comments

Allied-telesis AT-8350GB User Manual Page 28