Network Service ModuleInstallation and Safety GuideAT-AR040AT-AR040-BAT-AR041AT-AR042AT-AR048AT-AR048-B
Installation and Safety Guide 9613-000610 Rev C6. Slide the NSM into place.Slide the NSM into the NSM bay, making sure the ends of the captive screws
10 Network Service Module613-000610 Rev C LEDs and What They MeanThe following LEDs report operations and faults on NSMs: “AT-AR041 and AT-AR042 LEDs
Installation and Safety Guide 11613-000610 Rev CAT-A R0 48 an d AT- A R 0 4 8-B LEDsThe following table describes LEDs on the AT-AR048 and AT-AR048-B
Obtaining Documentation and ResourcesFor more information, see: the Installation and Safety Guide for your switch or router the Network Service Modu
Network Service ModuleInstallation and Safety GuideAT-AR0 40AT-AR040-BAT-AR0 41AT-AR0 42AT-AR0 48AT-AR048-BDownload the complete document set fromwww.
2 Network Service Module613-000610 Rev C Network Service Module Installation and Safety GuideDocument Number 613-000610 Rev C.© 2007-2008 Allied Teles
Installation and Safety Guide 3613-000610 Rev CContentsAbout this Guide ...
4 Network Service Module613-000610 Rev CAbout this GuideThis Installation and Safety Guide describes how to install the following Network Service Modu
Installation and Safety Guide 5613-000610 Rev CAT-AR048 SupportMaximum DS3 packet forwarding rates are achieved only when the AT-AR048 is installed in
6 Network Service Module613-000610 Rev C Hot SwappingThere are two methods for installing and removing NSMs: the standard installation method and the
Installation and Safety Guide 7613-000610 Rev CInstalling a Network Service ModuleWarning Failure to follow this procedure when hot swapping an NSM wi
8 Network Service Module613-000610 Rev C If an NSM is already installed, disconnect all network cables and TNV lines before removing the NSM from the
Comments to this Manuals