Allied-telesis AT-GS950/10PS User Manual

613-001768 Rev DAT-GS950/48PSAT-GS950/16PSAT-GS950/10PSGigabit Ethernet PoE+ SwitchesInstallation Guide

List of Tables10

11PrefaceThis guide contains the installation instructions for the AT-GS950/10PS, AT-GS950/16PS, and AT-GS950/48PS Gigabit Ethernet PoE+ Switches. Thi

12Symbol ConventionsThis document uses the following conventions:NoteNotes provide additional information.CautionCautions inform you that performing o

AT-GS950/10PS, AT-GS950/16PS, and AT-GS950/48PS Switches Installation Guide13Contacting Allied TelesisIf you need assistance with this product, you m

14

15Chapter 1OverviewThis chapter provides descriptions of the AT-GS950/10PS, AT-GS950/16PS, and AT-GS950/48PS Layer 2 Gigabit Ethernet Switches and con

Chapter 1: Overview16FeaturesHere are the hardware features of the AT-GS950/10PS, AT-GS950/16PS and AT-GS950/48PS Gigabit Ethernet Switches.Twisted Pa

AT-GS950/10PS, AT-GS950/16PS, and AT-GS950/48PS Switches Installation Guide17LEDs Here is a brief description of the port LEDs: Power LED/SYS; refer

Chapter 1: Overview18Front and Back PanelsFigure 1 illustrates the front panels of the AT-GS950/10PS, AT-GS950/16PS, and AT-GS950/48PS Gigabit Etherne

AT-GS950/10PS, AT-GS950/16PS, and AT-GS950/48PS Switches Installation Guide19See Figure 2 for an example of the AT-GS950/10PS back panel.Figure 2. AT-

Copyright  2014 Allied Telesis, Inc. All rights reserved. No part of this publication may be reproduced without prior written permission from Allied

Chapter 1: Overview20Management SoftwareThe switches are shipped with the management software pre-installed. The software provides a web-browser inter

AT-GS950/10PS, AT-GS950/16PS, and AT-GS950/48PS Switches Installation Guide21Twisted Pair PortsThe AT-GS950/10PS, AT-GS950/16PS, and AT-GS950/48PS Lay

Chapter 1: Overview22Power over Ethernet (PoE)Power over Ethernet technology permits both power and data to be transmitted over an Ethernet cable. Bot

AT-GS950/10PS, AT-GS950/16PS, and AT-GS950/48PS Switches Installation Guide23Combo PortsThe AT-GS950/8 and AT-GS950/48PS Switches have two combo ports

Chapter 1: Overview24LEDsThere are four types of LEDs on the AT-GS950 Switches: “PWR/SYS LEDs” on page 24 “10/100/1000 BaseT Link Activity LEDs” on

AT-GS950/10PS, AT-GS950/16PS, and AT-GS950/48PS Switches Installation Guide25Figure 6. SYSTEM LED on AT-GS950/16PSFigure 7. SYS LED on AT-GS950/48PSTa

Chapter 1: Overview2610/100/1000BaseT LinkActivity LEDsThe Link Activity (L/A) LEDs provide information about the 10/100/1000Base-T ports. AT-GS950/10

AT-GS950/10PS, AT-GS950/16PS, and AT-GS950/48PS Switches Installation Guide27Figure 9. AT-GS950/16PS Link/Activity/Speed LEDsThe AT-GS950/48PS switch

Chapter 1: Overview28SFP LEDs The SFP LEDs indicate the Link/Activity and Speed status of each SFP slot.NoteAll of the port LEDs are off when the swit

AT-GS950/10PS, AT-GS950/16PS, and AT-GS950/48PS Switches Installation Guide29Figure 12. AT-GS950/16PS SFP Status LEDsThe AT-GS950/48PS SFP LEDs can be

3Electrical Safety and Emissions StandardsThis product meets the following standards.RFI Emissions FCC Class A, EN55022 Class A, EN61000-3-2, EN61000-

Chapter 1: Overview30PoE LEDs All three PoE switches have two types of PoE LEDs indicating the PoE status for each port and maximum power limit of the

AT-GS950/10PS, AT-GS950/16PS, and AT-GS950/48PS Switches Installation Guide31Figure 14. AT-GS950/10PS PoE and PoE MAX LEDsFigure 15. AT-GS950/16PS PoE

Chapter 1: Overview32PoEGreen PoE power is being supplied to the PD normally.AmberIndicates the total PoE output power for this port exceeds the maxim

AT-GS950/10PS, AT-GS950/16PS, and AT-GS950/48PS Switches Installation Guide33eco-Friendly ButtonThe eco-Friendly button serves multiple functions. See

Chapter 1: Overview34Reboot/Reset theSwitchUse the following procedure to reboot the switch or reboot the switch and reset the switch to its factory d

AT-GS950/10PS, AT-GS950/16PS, and AT-GS950/48PS Switches Installation Guide35Power SupplyEach switch has an internal power supply with a single AC pow

Chapter 1: Overview36FansBoth the AT-GS950/16PS and AT-GS950/48PS switches have internal fans. You cannot remove or replace these fans in the field. T

37Chapter 2InstallationThis chapter contains the following sections: “Reviewing Safety Precautions” on page 38 “Selecting a Site for the Switch” on

Chapter 2: Installation38Reviewing Safety PrecautionsPlease review the following safety precautions before you begin to install the chassis or any of

AT-GS950/10PS, AT-GS950/16PS, and AT-GS950/48PS Switches Installation Guide39CautionAir vents must not be blocked and must have free access to the roo

4Translated Safety StatementsImportant: The  indicates that a translation of the safety statement is available in a PDF document titled “Translated S

Chapter 2: Installation40WarningReliable earthing of rack-mounted equipment should be maintained. Particular attention should be given to supply conne

AT-GS950/10PS, AT-GS950/16PS, and AT-GS950/48PS Switches Installation Guide41Selecting a Site for the SwitchObserve the following requirements when ch

Chapter 2: Installation42Cable SpecificationsTable 9 contains the cable specifications for the twisted pair ports.NoteThe twisted pair ports on the sw

AT-GS950/10PS, AT-GS950/16PS, and AT-GS950/48PS Switches Installation Guide43Unpacking the SwitchTo unpack the switch, perform the following procedure

Chapter 2: Installation44Figure 18. Shipping Package ContentsTwo equipment rack or wall bracketsEight bracket screwsFour wall anchorsFour wall screwsF

AT-GS950/10PS, AT-GS950/16PS, and AT-GS950/48PS Switches Installation Guide45Installing the Switch on a DesktopYou may install the switches on a deskt

Chapter 2: Installation46Installing the Switch in an Equipment RackTo install the switch in a standard 19-inch equipment rack, perform the following p

AT-GS950/10PS, AT-GS950/16PS, and AT-GS950/48PS Switches Installation Guide47Figure 21. Attaching the Rack-Mount Brackets to the Switch (Continued)3.

Chapter 2: Installation48Installing the Switch on a WallOnly the AT-GS950/10PS and AT-GS950/16PS switches can be installed on a wall. CautionThe AT-GS

AT-GS950/10PS, AT-GS950/16PS, and AT-GS950/48PS Switches Installation Guide494. Have another person hold the switch at the wall location where the swi

5Preface...

Chapter 2: Installation506. While another person holds the switch at the wall location, secure it to the wall using the four wall mounting screws. See

AT-GS950/10PS, AT-GS950/16PS, and AT-GS950/48PS Switches Installation Guide51Installing Optional SFP TransceiversTo install an SFP transceiver, perfor

Chapter 2: Installation524. Slide the transceiver into the SFP slot until it clicks into place. See Figure 27.Figure 27. Inserting the SFP5. Verify th

AT-GS950/10PS, AT-GS950/16PS, and AT-GS950/48PS Switches Installation Guide53For information on the cable specifications of the SFP, consult the docum

Chapter 2: Installation54Cabling the SwitchObserve the following guidelines when connecting twisted pair and fiber optic cables to the ports on the sw

AT-GS950/10PS, AT-GS950/16PS, and AT-GS950/48PS Switches Installation Guide55Powering On the SwitchTo power on the switch, perform the following proce

Chapter 2: Installation56

57Chapter 3TroubleshootingThis chapter contains information on how to troubleshoot the switch if a problem occurs.NoteFor further assistance, please c

Chapter 3: Troubleshooting58 Verify that the twisted pair cable is securely connected to the port on the media converter channel and to the port on t

AT-GS950/10PS, AT-GS950/16PS, and AT-GS950/48PS Switches Installation Guide59 Test the attenuation on the fiber optic cable with a fiber optic tester

Contents6

Chapter 3: Troubleshooting60

61Appendix ATechnical SpecificationsBelow are the technical specifications for the AT-GS950/10PS, AT-GS950/16PS and AT-GS950/48PS switches. The specif

Appendix A: Technical Specifications62Environmental SpecificationsPower SpecificationsInput Supply Voltage - 100-240 VAC, 50 - 60 HzPoE Specifications

AT-GS950/10PS, AT-GS950/16PS, and AT-GS950/48PS Switches Installation Guide63Safety and Electromagnetic Emissions CertificationsConnectors and Port Pi

Appendix A: Technical Specifications64Table 18 lists the RJ-45 connector pins and their signals when a 1000Base-T port is operating at 1000 Mbps.Table

7Figure 1: AT-GS950/10PS, AT-GS950/16PS, and AT-GS950/48PS Front Panels... 18Figure 2: AT-GS

List of Figures8

9Table 1. Max Ports Supported per PoE Class ..........................