Allied-telesis AT-GS950/16 User Manual download pdf (Page 52)

Chapter 2: Basic Switch Configuration

responsible for keeping the password in a safe place. If it is lost,

Allied Telesis does not have a way to help you recover it.

6. Re-enter the same password in the Confirm Password field.

7. Click Apply.

The following message is displayed:

By clicking on Accept, the Factory Default Reset function will be

Disabled on both the switch management software and the

physical front panel ecoFriendly button. If you loose this password,

ATI cannot recover it for you.

By Clicking on Cancel, the “Factory Default Reset” function will

remain Enabled on both the switch management software and the

physical front panel ecoFriendly button.

8. Click Accept.on the message.

The Factory Default Reset page changes and displays the Factory

Default Reset feature as Disabled. See Figure 16.

Figure 16. Factory Default Reset Disabled Page

9. From the main menu on the left side of the page, select Save

Configuration to Flash to permanently save your changes.

Enabling Factory

Default Reset

If the Factory Default Reset feature is disabled and you choose to

Enable it, perform the following procedure:

1. From the main menu on the left side of the page, select the Tools

folder.

The Tools folder expands.

2. From the Tools folder, select Reboot.

The Factory Default Reset/Reboot Page is displayed. See Figure 16.

3. Go to the Factory Default Reset section on the upper part of the page.

The Factory Default Reset field should be set to Disable.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 363 364

No comments

Allied-telesis AT-GS950/16 User Manual Page 52