Allied Telesis AT-FS705L Installation Guide

AT-FS705LFast Ethernet SwitchInstallation GuidePN 613-50326-00 Rev C

Welcome to Allied TelesynxTell Us What You ThinkIf you have any comments or suggestions on how we might improve this or other Allied Telesyn documents

1Chapter 1OverviewThe AT-FS705L is an unmanaged Layer 2 switch. This switch can be used in a variety of network configurations and topologies. You can

Overview2Features❑ LEDs for unit and port status❑ Auto MDI/MDI-X on the twisted pair ports❑ Half- or full-duplex operation on both ports❑ Five RJ-45 t

AT-FS705L Switch Installation Guide3Twisted Pair PortsThe AT-FS705L switch has five 10Base-T/100Base-TX twisted pair ports. Each twisted pair port fea

Overview4Auto MDI/MDI-XAn RJ-45 twisted pair port on a 10 Mbps or 100 Mbps Ethernet network device can have one of two possible wiring configurations:

AT-FS705L Switch Installation Guide5The switch also checks the destination MAC address of each frame it receives. The destination address is the MAC a

Overview6Network TopologiesThe AT-FS705L switch can be used in three different topologies: standalone, cascade, and uplink. Each topology is describe

AT-FS705L Switch Installation Guide7CascadeFigure 3 illustrates two AT-FS705L switches connected together to support multiple network segments. This i

Overview8UplinkFigure 4 illustrates multiple AT-FS705L switches can be interconnected using uplinks from a centralized backbone Fast Ethernet switch.F

9Chapter 2InstallationThis chapter contains the installation instructions for the AT-FS705L switch. This switch can be used on a desktop or mounted on

Copyright © 2002 Allied Telesyn, Inc.960 Stewart Drive Suite B, Sunnyvale CA 94085, USAAll rights reserved. No part of this publication may be reprodu

Installation10Planning the InstallationBe sure to observe the following guidelines when planning the installation of your switch.❑ The end-nodes conne

AT-FS705L Switch Installation Guide11Reviewing Safety GuidelinesPlease review the following safety guidelines before installing the AT-FS705L switch.W

Installation12Installing the Switch on a DesktopThe AT-FS705L switch can be used on a desktop or mounted on a wall. To wall-mount the switch, refer to

AT-FS705L Switch Installation Guide13Wall-Mounting the SwitchThe switch can be mounted horizontally on a wall using the keyholes on the bottom of the

15Chapter 3TroubleshootingFollow the guidelines below to test and troubleshoot the installation in the event a problem occurs.If the POWER LED is OFF,

Troubleshooting16If there is a communication problem between the end-nodes connected to the switch, do the following:❑ Verify that the end-nodes are o

17Appendix ATechnical SpecificationsPhysicalDimensions: W x D x H197 mm x 117 mm x 37 mm (7.75 in x 4.59 in x 1.45 in)Weight: 0.610 kg (1.35 lbs)Envir

Technical Specifications18Agency ComplianceEMI/RFI: FCC Class B, EN55022 Class BElectrical Safety:cCSAus, TUVImmunity: EN55024Pinout AssignmentsFigure

19Appendix BTranslated Safety and Emission InformationImportant: This appendix contains multiple-language translations for the safety statements in th

iiiElectrical Safety and Emission Compliance StatementsStandards: This product meets the following standards:U.S. Federal Communications CommissionDec

Translated Safety and Emission Information20Standards: This product meets the following standards.! 1 RFI Emission EN55022 Class B! 2 Immunity EN55024

AT-FS705L Switch Installation Guide21Safety! 4 Electrical NoticesWarning: Electric Shock HazardTo prevent electric shock, do not remove the cover. No

Translated Safety and Emission Information22! 6 Automatische Spannungseinstellung Dieses Gerät stellt sich automatisch auf die auf dem Etikett aufgefü

AT-FS705L Switch Installation Guide23! 11 Betjeningstemperatur: Dette apparat er konstrueret til en omgivende temperatur på maksimum 40 grader C.! 12

Translated Safety and Emission Information24Normes: ce produit est conforme aux normes de suivantes:! 1 Emission d’interférences radioélectriques EN55

AT-FS705L Switch Installation Guide25Standardit: Tämä tuote on seuraavien standardien mukainen.! 1 Radioaaltojen häirintä EN55022 Luokka B! 2 Kestävyy

Translated Safety and Emission Information26Standard: Questo prodotto è conforme ai seguenti standard.! 1 Emissione RFI (interferenza di radiofrequenz

AT-FS705L Switch Installation Guide27Sikkerhetsnormer: Dette produktet tilfredsstiller følgende sikkerhetsnormer.! 1 RFI stråling EN55022 Klasse B! 2

Translated Safety and Emission Information28Padrões: Este produto atende aos seguintes padrões.! 1 Emissão de interferência de radiofrequência EN5502

AT-FS705L Switch Installation Guide29Estándares: Este producto cumple con los siguientes estándares.! 1 Emisión RFI EN55022 Clase B! 2 Inmunidad EN55

Electrical Safety and Emission Compliance StatementsivRFI Emission EN55022 Class B ! 1Immunity EN55024 ! 2Electrical Safety EN60950 (TUV), UL60950 (cU

Translated Safety and Emission Information30Standarder: Denna produkt uppfyller följande standarder.! 1 Radiostörning EN55022 Klass B ! 2 Immunitet EN

vTable of ContentsElectrical Safety and Emission Compliance Statements ...iiiWelcome to Allied Telesyn ...

viChapter 2Installation ...9Verifying the Package

viiThis guide contains instructions on how to install and configure the AT-FS705L Fast Ethernet Switch.Where to Find Web-based GuidesThe Allied Telesy

Welcome to Allied TelesynviiiContacting Allied Teleysn Technical SupportYou can contact Allied Telesyn technical support online or by telephone or e-m

AT-FS705L Switch Installation GuideixReturning ProductsProducts for return or repair must first be assigned a Return Materials Authorization (RMA) num