Allied-telesis AT 8000/8POE User Manual download pdf (Page 46)

Chapter 2: Installation

Starting a Management Session

The AT-8000/8POE Fast Ethernet Switch provides two methods for

accessing the switch and performing management functions, as described

in the following sections:

 “Establishing a Local Connection to use the Menus Interface,” next

 “Establishing a Remote Connection to Use the Web Browser Interface”

on page 48

Establishing a

Local Connection

to use the Menus

Interface

To start a local management session on an AT-8000/8POE Fast Ethernet

Switch, perform the following procedure:

1. Connect one end of the management cable to the console port on the

switch, as shown in Figure 15.

Figure 15. Connecting the Console Cable

2. Connect the other end of the cable to the RS-232 port on a terminal or

PC with a terminal emulator program.

3. Configure the terminal or terminal emulator program as follows:

 Baud rate: 9600

 Data bits: 8

 Stop bits: 1

 Flow control: None

Note

These default settings are for a DEC VT100 or ANSI terminal, or an

equivalent terminal emulation program.

99R

TERMINAL PORT

10/100/1000

se-T

SFP

UPLINK PO

RS-232

828

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 55 56

No comments

Allied-telesis AT 8000/8POE User Manual Page 46