Allied-telesis AlliedView-EMS 4.0.3 Device-Management User Manual download pdf (Page 376)

100

101

AlliedView™-EMS 4.0.3 Device Management Guide Page 376 of 468

Bandwidth Limits

Displays bandwidth limits of the switch ports.

Note - The current firmware version does not allow the Ingress Limit

parameter to be configured.

Error Statistics

Displays error statistics.

Note - The following parameters are not applicable to the AT-x900-24X series and

should be ignored:

• Ethernet Chip Set

• Symbol Errors

• Duplex Status

• Rate Control Ability

• Rate Control Status

Spanning Tree Info

Displays the port's spanning tree parameters.

Note - The Path Cost Contribution parameter is not applicable to the AT-x900-24X

series and should be ignored.

Note - Valid MIB Set values for the Port Path Cost parameter is in the range [1-

65535] inclusive.

MAU Info

Displays interface-related MAU information for the port.

Note - The MAU Type List Bits and HC False Carriers parameters are not applicable

to the AT-x900-24X series and should be ignored.

Note - The MAU Status and Default MAU Type parameters are implemented as

'read-only'.

MAU Negotiation Info

Displays the MAU's auto-negotiation settings and its status.

Note - The following parameters are not applicable to the AT-x900-24X series and

should be ignored:

• Capability Bits

• Advertised Bits

• Received Bits

• Remote Fault Advertised

• Remote Fault Received

1 2 ... 371 372 373 374 375 376 377 378 379 380 381 ... 467 468

Comments to this Manuals

No comments

Allied-telesis AlliedView-EMS 4.0.3 Device-Management User Manual Page 376

Comments to this Manuals

Related products and manuals for Computer hardware Allied-telesis AlliedView-EMS 4.0.3 Device-Management