Allied-telesis AT-VIEW PLUS 2.3 DEVICE MANAGEMENT User Manual download pdf (Page 43)

Allied Telesyn AT-VIEW PLUS

DEVICE MANAGEMENT

PN 613-50507-00 Rev C Page 43 of 224

Supports up to 8 stacked AT-8324 switches.

Device Manager LEDs for AT-8324

LED State Description

PWR Green The switch is receiving power.

DUPLEX Green

Orange

The port is operating in full-duplex mode.

The port is operating in half-duplex mode.

Note - The current firmware version does not allow AT-View Plus Device Manager to support the

RPS and the Master LEDs.

Note - A GBIC image is always visible on the GBIC slot of the AT-A15 expansion module even if

there is no GBIC physically inserted.

Agent Menu

From the Agent menu, you can view and edit the system information for the device, or log into the

CLI using Telnet.

System Info

Displays basic system information, including system name, location, contact and description.

Note - Attempting to enter more than 39 characters for the System Contact, System Name,

and System Location parameters will result in the error message: "The error occurred with

'Set' operation. Error: gen Error".

Firmware Info

Displays firmware version.

Network Info

Displays network-related information such as the addresses of the default gateway and the

agents.

Manager Address Info

Displays the IP address of the management station.

Reset

Resets the switch.

Telnet

Starts a Telnet connection to the switch.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 223 224

No comments

Allied-telesis AT-VIEW PLUS 2.3 DEVICE MANAGEMENT User Manual Page 43