Allied-telesis LanEdge Print Server User Manual download pdf (Page 3)

Page 1

Physical Installation

1. Connect the LAN cable to the Print Server. If both

10BaseT and 10Base2 connections are fitted, use only

ONE (1) connection.

2. Connect the Printer(s).

3. Connect the Power Adapter Cable.

4. Power ON, and check the Error LED. It should flash, then

turn off. If it stays on, there is a hardware error.

Setup - Overview

The following sections describe how to make the Print Server

operational in various environments.

The fastest and simplest method of installation is to use

Windows Peer-to-Peer printing. This method can be used even

if there is an existing Network Server (NetWare, Unix or

Windows) on your LAN.

If your situation is not included, or this information is

insufficient, please refer to the full User Manual in the Manual

folder on the CD-ROM.

1 2 3 4 5 6 7 8 ... 19 20

No comments

Allied-telesis LanEdge Print Server User Manual Page 3