Allied Telesis AT-CM20x Series Installation Guide

Browse online or download Installation Guide for Network media converters Allied Telesis AT-CM20x Series. Allied Telesis AT-CM20x Series Installation guide [en] User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 2
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
Overview
The AT-CM20x Series (AT-CM201, AT-CM202, and AT-CM202/x Series) line
cards are 10/100 Mbps copper-to-fiber media converter line cards. These line
cards can be installed in any of the Converteon™ Media Converter chassis,
including the AT-CV5000, AT-CV1000, and AT-CV1200. Each line card
features one fiber optic port and one copper twisted pair port. The fiber optic
port operates at a fixed operating speed of 100 megabits per second (Mbps)
and the twisted pair port operates at 10 or 100 Mbps speed. The fiber optic
port is IEEE 802.3ah-compliant and has a either a simplex SC, dual SC, or ST
connector with a maximum operating distance from 2 kilometers (1.24 miles)
to 40 kilometers (24.8 miles), depending on the model. The twisted pair port
has an RJ-45 connector and a maximum operating distance of 100 meters
(328 feet). Both ports feature half- or full-duplex mode operation. The line
card is hot-swappable into and out of the chassis.
Figure 1. AT-CM20x Series Line Card (AT-CM202 Model)
246
3K
1 2 3 4
3K
1 2 3 4
S
W
1
S
W
2
AT-CM202
LK
AT
T
X
SML
ML OAM
R
DY
LK
AT FD
T
X
M
M
R
X
Related Documents
This installation guide is an abbreviated version of the installation procedure.
For details on the components, features, and functions of this product, refer to
the following documents on our web site, www.alliedtelesis.com:
AT-CV5000 Media Converter Chassis Installation Guide
PN 613-50580-00
AT-CV1000 Media Converter Chassis Installation Guide
PN 613-50582-00
AT-CV1200 Media Converter Chassis Installation Guide
PN 613-000331
Converteon™ Media Converter Line Cards Reference Guide
PN 613-50581-00
AT-S70 Management Software User’s Guide
PN 613-50617-00
Package Contents
Make sure the following items are included in the shipping package. If any
item is missing or damaged, contact your Allied Telesis sales representative
for assistance.
One AT-CM20x Series Line Card
This Installation Guide
Warranty Card
AT-CM20x Series Line Card Components
The AT-CM20x Series line card, shown in Figure 2, features the following
components:
One 100Base-FX fiber optic port with one simplex/dual SC or ST connector
One 10/100Base-TX twisted pair port with an RJ-45 connector
Two DIP switches
Port and system status LEDs
Figure 2. AT-CM20x Series Line Card Components
289
3
K
1 2 3 4
3
K
1 2 3 4
SW1
S
W
2
AT-CM
202
LK
A
T
T
X
SML
ML O
AM
R
D
Y
LK
A
T FD
T
X
M
M
R
X
3K
1 2 3 4
3K
1 2 3 4
SW1
SW2
Port Configuration
DIP Switch 2
Diagnostic Mode
DIP Switch 1
Fiber Optic Port LEDs
Twisted Pair Port LEDs
Line Card LEDs
Fiber Optic Port
RJ-45 Port
Fiber Optic and RJ-45 Ports
The AT-CM20x Series line card features one fiber optic port and one twisted
pair port.
The fiber optic port features one simplex/dual SC or ST connector, and has a
fixed operating speed of 100 megabits per second (Mbps). The speed cannot
be changed. The port has a maximum operating distance from 2 kilometers
(1.24 miles) to 40 kilometers (24.8 miles) and can use either a single-mode (9/
125 micron) or a multi-mode (50/125 or 62.5/125 micron) fiber optic cable.
Laser
Class 1 laser product.
Laser
Do not stare into the laser beam.
The twisted pair port is 10/100Base-TX compliant and has a speed of
10 megabits per second (Mbps) and 100 Mbps. The port features an 8-pin
RJ-45 connector with a maximum operating distance of 100 meters (328 ft).
Category 3 or better, 100 ohm shielded or unshielded, twisted pair cabling is
required for 10 Mbps operation. Category 5 or Enhanced Category 5 (5E),
100 ohm shielded or unshielded, twisted pair cabling is required for 100 Mbps
operation.
Status LEDs
The following table lists the line card status LEDs.
LED Color Description
RDY Green The line card has passed diagnostics.
OFF The line card has not passed diagnostics.
SML Green The Smart MissingLink mode is enabled.
OFF The Smart MissingLink mode is disabled.
ML Green The MissingLink mode is enabled.
OFF The MissingLink mode is disabled.
OAM Green The OAM mode is enabled (visible or
bypass). The OAM mode setting is set by
the DIP switches. For more information on
the DIP switches, refer to the
Converteon™ Media Converter Line Cards
Reference Guide.
OFF The OAM mode is disabled.
CONVERTEON
Family
AT-CM20x Series Media Converter Line Cards
Installation Guide
Allied Telesis, Inc.
www.alliedtelesis.com
2 3
613-000608 Rev B 1
*613-000608 Rev B*
Page view 0
1 2

Summary of Contents

Page 1 - *613-000608 Rev B*

OverviewThe AT-CM20x Series (AT-CM201, AT-CM202, and AT-CM202/x Series) line cards are 10/100 Mbps copper-to-fiber media converter line cards. These l

Page 2

The following table lists the fiber optic port and twisted pair port LEDs.FeaturesThe AT-CM20x Series line card is designed to support Link Test, Miss

Comments to this Manuals

No comments