Allied-telesis AT-8550SP User Manual download pdf (Page 35)

AT-8500 Series Fast Ethernet Switch Installation Guide

RS-232 Terminal Port

You can use the RS-232 terminal port to establish a local (out-of-band)

management session with the switch and to configure the switch’s

operating parameters. You establish a local management session with

the switch by connecting either a terminal or a personal computer with a

terminal emulation program to the port.

Note

You are not required to manage an AT-8500 Series switch. If the

default switch settings are adequate for your network, you can use

the unit as an unmanaged switch. For the default settings, refer to

the AT-S62 Management Software User’s Guide.

The RS-232 terminal port has a DB-9 female connector and uses a

straight-through RS-232 cable (included with the switch). The default

settings for the RS-232 terminal port are:

 Baud rate: 9600 bps

 Data bits: 8

 Parity: None

 Stop bits: 1

 Flow control: None

Note

These settings are for a DEC VT100 or ANSI terminal, or an

equivalent terminal emulation program.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 113 114

No comments

Allied-telesis AT-8550SP User Manual Page 35