Chapter 2: Installation
36
Installing the Switch in a Rack
To install the switch in a rack, perform the following procedure:
1. If attached, remove the rubber feet using a flat-head screwdriver.
2. Install a bracket on one side of the switch using a Phillips screwdriver
and three of the rack-mount screws included with the switch. Figure 9
shows how to mount the brackets on the switch.
Figure 9. Attaching the Rack-Mount Bracket
3. Repeat step 2 to attach the remaining bracket to the other side of the
switch.
4. Mount the switch on a 19-inch rack, as shown in Figure 10.
Figure 10. Mounting the Switch on the Rack
1006
1007
Comments to this Manuals