Allied Telesis AT-8000S User Manual download pdf (Page 120)

Configuring SNMP

Defining SNMP Users

Page 119

– SHA Password — Users are authenticated using the HMAC-SHA-96 authentication level. The user

should enter a password.

– No Authentication — No user authentication is used.

2. Click Modify. The SNMP User Settings Page opens:

Figure 76: SNMP User Settings Page

The SNMP User Settings Page contains the following additional SNMPv3 fields:

• Authentication Method — Defines the SNMP Authentication method.

• Password — Defines the password for the group member.

• Authentication Key — Defines the HMAC-MD5-96 or HMAC-SHA-96 authentication level. The

authentication and privacy keys are entered to define the authentication key. If only authentication is required,

16 bytes are defined. If both privacy and authentication are required, 32 bytes are defined. Each byte in

hexadecimal character strings is two hexadecimal digits. Each byte can be separated by a period or a colon.

• Privacy Key — Defines the privacy key (LSB). If only authentication is required, 20 bytes are defined. If both

privacy and authentication are required, 36 bytes are defined. Each byte in hexadecimal character strings is

two hexadecimal digits. Each byte can be separated by a period or colon.

3. Define the User Name, Group Name, Engine ID, Authentication Method, Password, Authentication Key, and

Privacy Key fields.

4. Click Apply. The SNMP group membership is modified, and the device is updated.

1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 187 188

No comments

Allied Telesis AT-8000S User Manual Page 120