Allied-telesis AR700 User Manual Page 12

  • Download
  • Add to my manuals
  • Print
  • Page
    / 22
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 11
Features in 281-01 12
Version 281-01
C613-10482-00 REV A
CR00013077
IPv6 2 When an IPv6 address was deleted on the router or switch, and that IPv6 address
had previously been learnt by a remote IPv6 node, then the router or switch
would reboot if it received an ICMPv6 Neighbour Solicitation message from the
remote node. This meant, for example, that if you successfully pinged an address
on the router or switch, then deleted that address, then attempted to ping the
old address again, the router or switch would reboot.
This issue has been resolved.
YYYYY- - YYY
CR00013234
IP Gateway 2 If the router or switch attempted to email log output, and used a domain name
server that gave a non-standard response to the DNS query, the router or switch
sometimes rebooted.
This issue has been resolved.
YYYYYYYYYY
CR00013276
UPnP 2 In UPnP, Msearch requests were stored indefinitely, which eventually exhausted
the router’s memory and caused it to reboot.
This issue has been resolved. Msearch requests are now deleted once the router
has finished with them.
YYY- ------
CR00013309
L2TP 2 When an L2TP LAC Client (for example, a Microsoft Windows XP VPN Client)
activated an L2TP tunnel to a router or switch that was operating as an LNS, the
dynamic PPP interface on the LNS left out the PPP authentication phase.
This also prevented the interface from obtaining an IP address by remote IP
assignment from a User Database entry.
This issue has been resolved.
YYYYY- - YYY
CR00013407
EPSR 2 The switch correctly accepted a changed ring flap time (the commands create or
set epsr ringflaptime). However, if the command create config was used to
save the configuration and the switch used that configuration after a reboot,
EPSR failed.
This issue has been resolved.
-------YY-
CR Module Level Description
AR400
AR7x5
AR750S / AR770S
Rapier i
AT-8800
AT-8600
AT-8700XL
AT-8948 / x900-48
AT-9900
AT-9800
Page view 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 21 22

Comments to this Manuals

No comments