Allied Telesis AT-PBC18 Installation Guide download pdf (Page 17)

Chapter 2

Installing the PowerBlade PBC18

This chapter explains how to install the chassis on a desktop or in a 19-, 23- or

25-inch rack.

Verifying Package Contents

Make sure the following items are included in your package. If any item is

missing or damaged, contact your Allied Telesyn sales representative for

assistance.

❑ One PowerBlade PBC18 Chassis

❑ One rackmounting kit

❑ Four protective rubber feet (for desktop use only)

❑ This quick install guide

❑ Warranty card

Preparing the Site

Be sure to observe the following guidelines when planning the installation of

your chassis.

❑ Make sure that the chassis’ power is accessible and cables can be

easily connected.

❑ Cables must be away from sources of electrical noise such as radios,

transmitters, broadband amplifiers, power lines, fluorescent or

halogen light fixtures.

❑ Air flow around the chassis and through its vents on the side and back

should not be restricted.

❑ If you are using the chassis on a desktop, make sure it is placed on a

level, secure surface.

❑ Do not place objects on top of the chassis.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 61 62

No comments

Allied Telesis AT-PBC18 Installation Guide Page 17