Allied-telesis AT-S63 User Manual download pdf (Page 267)

AT-S63 Management Software Web Browser Interface User’s Guide

Section III: SNMPv3 267

Select this value to associate the Security Name, or User Name, with

the SNMPv1 protocol.

v2c

Select this value to associate the Security Name, or User Name, with

the SNMPv2c protocol.

Select this value to associate the Security Name, or User Name, with

the SNMPv3 protocol.

8. In the Security Name field, enter a User Name that you previously

configured with the SNMPv3 User Table.

See “Creating a User Table Entry” on page 226.

9. In the Security Level field, select one of the following Security Levels:

Note

The value you configure for the Security Level must match the value

configured for the User Name in the User Table Menu. See

“Creating a User Table Entry” on page 226.

No Authentication/Privacy

This option represents neither an authentication nor privacy protocol.

Select this security level if you do not want to authenticate SNMP

entities and you do not want to encrypt messages using a privacy

protocol. This security level provides the least security.

Note

If you have selected SNMPv1 or SNMPv2c as the Security Model,

you must select No Authentication/Privacy as the Security Level.

Authentication

This option represents authentication, but no privacy protocol. Select

this security level if you want to authenticate SNMP users, but you do

not want to encrypt messages using a privacy protocol.You can select

this value if you configured the Security Model parameter with the

SNMPv3 protocol.

Privacy

This option represents authentication and the privacy protocol. Select

this security level to allow authentication and encryption. This level

provides the greatest level of security. You can select this value if you

configured the Security Model parameter with the SNMPv3 protocol.

1 2 ... 262 263 264 265 266 267 268 269 270 271 272 ... 429 430

No comments

Allied-telesis AT-S63 User Manual Page 267