Allied Telesis FS750/24 Technical Information download pdf (Page 42)

AT-FS750/24-41 Web User Interface Manual

6-18

Figure 52 – Layer2 Management > LA > Port State Infor

LA Load Balancing Policy

Figure 53 – Layer2 Management > LA > Load Balancing

Parameter

Description

Select

Select a port channel to apply the configuration change.

Port Channel

Port Channel ID.

Selection Policy

Select a load balancing argorithm for the port channel. The traffic will hash

between the member port of a port channel based on the rule selected. The

options are MAC Source, MAC Destination, MAC Source and Destination,

IP Source, IP Destination, IP Source and Destination. Default is MAC

Source and Destination.

Click Apply to submit the changes.

802.1X

802.1X Basic Settings

This page is the configure the 802.1X authentication global settings.

Figure 54 – Layer2 Management > 802.1X > Basic Settings

Parameter

Description

System Control

To activate or shutdown 802.1X function of the Switch. Select Start to activate

the function, Shutdown to shutdown it. Default is Start.

802.1X Authentication

To enable or disable the 802.1X authentication of the Switch. Select Enabled

to enable the function, Disabled to disable it. Default is Disabled.

Authentication Mode

Select the authentication database for 802.1X. Remote is to use the RADIUS

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 73 74

No comments

Allied Telesis FS750/24 Technical Information Page 42