AT-FS750/24-41 Web User Interface Manual
7-5
Matching packet with a range of destination port. For example source port 23
with mask FFFE means 22~23. The mask options are: 8000, C000, E000,
F000, F800, FC00, FE00, FF00, FF80, FFC0, FFE0, FFF0, FFF8, FFFC,
FFFE, FFFF.
Click Add to create a new ACL rule, Reset to clear the value just inputed.
Select an ACL rule to apply the configuration changes.
Specify the ACL ID of this rule.
Specify the action for packet matched. Select Permit to process the packets,
Deny to discard them.
Matching packet with a specific source IP address.
Matching packet with a range of source IP address. For example 172.17.5.1
with mask 255.255.255.0 means 172.15.5.0~255.
Matching packet with a specific destination IP address.
Matching packet with a range of destination IP address. For example
172.17.5.1 with mask 255.255.255.0 means 172.15.5.0~255.
Specify the ports to apply this ACL rule.
Matching the L4 protocol type of the packet. The options are: icmp, ip, tcp,
udp, ospf, pim and other.
When selecting others, insert the protocol ID in the right column.
Matching ICMP packets with specific message type. The possible code is
0-255.
Matching ICMP packets with specific message code. The possible type is
0-255.
Matching packets with specific DSCP type. The possible value is 0-63.
Matching packets with specific ToS value. The possible value is 0-7
Macthing packets with a specific TCP acknowledge flag. The options are:
Establish – TCK ack packet.
Not Establish - TCP ack-not packet.
Any - Any kind of TCP acknowledge packet.
Macthing packets with a specific TCP reset flag. The options are:
Set - TSP reset packet.
Not Set - TCP reset-not packet.
Any - Any kind of TCP reset packet.
Matching packets with a specific L4 source port.
Matching packet with a range of source port. For example source port 23 with
mask FFFE means 22~23. The mask options are: 8000, C000, E000, F000,
F800, FC00, FE00, FF00, FF80, FFC0, FFE0, FFF0, FFF8, FFFC, FFFE,
FFFF.
Matching packets with a specific L4 destination port.
Matching packet with a range of destination port. For example source port 23
with mask FFFE means 22~23. The mask options are: 8000, C000, E000,
F000, F800, FC00, FE00, FF00, FF80, FFC0, FFE0, FFF0, FFF8, FFFC,
FFFE, FFFF.
Click Apply to submit the changes to the ACL rule, Delete to delete it.
Classmap Settings
This page is to create/configure a Classmap.
Comments to this Manuals