AT-S63 Management Software Web Browser Interface User’s Guide
Section II: Advanced Operations 159
TCP Flags
Defines a traffic flow by TCP flag. To set this parameter, IP Protocol
must be set to TCP. Options are
URG - Urgent
ACK - Acknowledgement
RST - Reset
PSH - Push
SYN - Synchronization
FIN - Finish
UDP Source Port
Defines a traffic flow by source UDP port. To set this parameter, IP
Protocol must be set to UDP.
UDP Destination Port
Defines a traffic flow by a destination UDP port. To set this parameter,
IP Protocol must be set to UDP.
6. Click Apply.
The new classifier is created on the switch.
7. To permanently save your changes, select the Save Config option in
the Configuration menu.
Comments to this Manuals