AT-FS750/24-41 Web User Interface Manual
6-6
To enable/disable the filter of ingress packets not with the same VLAN tag as
the VLAN membership of the port. Default is Enabled.
Click Apply to submit the changes.
Static VLAN Configuration
This page is to set up the static VLAN configuration.
Figure 34 – Layer2 Management > VLAN > Static VLANs
Specify the VLAN ID to be created.
Specify the name of VLAN.
Specify the ports to apply the VLAN membership.
Specify the ports to be untagged interfaces.
Specify the ports to be forbidden interfaces.
Click Apply to submit the changes and the Reset button will clear the information inputed. Click Delete will
remove an existed VLAN.
There has to be at least one VLAN in the system.
Dynamic VLAN
Dynamic VLAN Global Configuration
This page is to set the global dynamic VLAN configuration.
Figure 35 – Layer2 Management > Dynamic VLAN > Dynamic VLAN Global Configuration
Comments to this Manuals