Allied Telesis Rapier G6F-SC Installation Guide download pdf (Page 7)

Quick Install Guide 7

C613-04022-01 REV G

1. 10/100/1000 Mbps operation is available only if the AT-A39/T Uplink Module is installed in a Rapier

G6, Rapier G6F, Rapier i or AT-8700XL model, otherwise operation is fixed at 1000 Mbps. Early

versions of the AT-A39/T operate at 1000 Mbps only, regardless of the switch model.

1. AT-A40 and AT-A41 Uplink Modules can only be installed in Rapier G6, G6F, Rapier i and

AT-8700XL switches.

Activity Flashing Amber Frames are being transmitted or received

through the port

Off No activity is occurring

Table 2: AT-A39/T LEDs.

LED State Function

Full Dup/Half

Dup/Col

Green The port is operating at full-duplex

Amber The port is operating at half-duplex

Flashing amber Collisions are occurring

Off No link is present

Activity Green A 1000 Mbps link is open

Flashing green 1000 Mbps activity is occurring

Amber

A 10/100 Mbps link is open

Flashing Amber

10/100 Mbps activity is occurring

Off No link is present

Table: 3 AT-A40/SC, AT-A40/MT, AT-A41/SC and AT-A41/MT LEDs

LED State Function

Activity/Link/Fault Green A link is open and the port is enabled

Flashing green 100 Mbps activity is occurring

Flashing amber

(and lower LED is Off)

The link has failed at the remote end

Off No link is present

Full Dup/Half

Dup/Col

Green The port is operating at full-duplex

Amber The port is operating at half-duplex

Flashing amber Collisions are occurring

Off No link is present

Both LEDs Alternate flashing of

upper and lower LED,

amber

The switch does not support this model

of uplink module

Table 1: AT-A35/SX and AT-A35/LX LEDs.

LED State Function

1 2 3 4 5 6 7 8 9

Comments to this Manuals

No comments

Allied Telesis Rapier G6F-SC Installation Guide Page 7

Comments to this Manuals

Related products and manuals for Network switches Allied Telesis Rapier G6F-SC