Allied Telesis AT-RPS8000 Specifications download pdf (Page 23)

Hardware Reference 23

C613-03066-00 REV D

Figure 10: Example output for the SHOW TEST COUNT command, with a test cable between ports 1 and 4.

Other Interface Tests

Refer to the Test Facility of the AT-8800 Series Software Reference for

information on testing other interfaces.

If a test fails, please contact your Authorised Allied Telesyn distributor or reseller.

Redundant Power Supply (RPS)

RPS units enhance network reliability by providing backup coverage for switch

Power Supply Units (PSUs).

AT-8800 Series switches have an RPS connector on their rear panel. The

connector allows the switch to be used in conjunction with an RPS.

When an RPS is required, AT-8848 and AT-8824 models use the AT-RPS8000

system. RPS systems can be purchased separately.

Board ID Bay Board Name Rev Serial number

----------------------------------------------------------------------------

Base 148 AT-8848 P1-0 42029694

Duration Frame Counters

Interface State Type (minutes) Tx RxTotal RxGood RxBad

--------------------------------------------------------------------------------

port1 testing TP < 1 000298842 000298841 000298841 000000000

port2 no test - - - - - -

port3 no test - - - - - -

port4 testing TP < 1 000298842 000298841 000298841 000000000

port5 no test - - - - - -

port6 no test - - - - - -

port7 no test - - - - - -

port8 no test - - - - - -

port9 no test - - - - - -

port10 no test - - - - - -

port11 no test - - - - - -

port12 no test - - - - - -

port13 no test - - - - - -

port14 no test - - - - - -

port15 no test - - - - - -

port16 no test - - - - - -

asyn0 testing - < 1 000000000 000000000 000000000 000000000

--------------------------------------------------------------------------------

Allied Telesis AT-RPS8000 Specifications Page 23