Allied Telesis AT-FS201 Installation Guide download pdf (Page 15)

AT-FS20x Series Installation Guide

The back panel of the AT-FS201, AT-FS202, and AT-FS202SC/FS1

Bridging Media Converters features a DC power connector and DIP

switches for manually configuring the ports.

Figure 7 shows the back panel of the AT-FS201, AT-FS202, and

AT-FS202SC/FS1 Bridging Media Converters with a 12VDC power

connector.

Figure 7. Back Panel of the AT-FS201, AT-FS202, and AT-FS202SC/FS1

Bridging Media Converters (12VDC Power Connector)

Table 1 lists the maximum operating distances for the converters.

Table 1. Maximum Operating Distances

Model

100Base-FX

10Base-T/100Base-

Connect

Maximum

Operating

Distance

1. Maximum distance for 100 Mbps optical datalinks is dependent on the follow-

ing factors: type of optical fiber, duplex mode of both end-nodes, and maximum

optical loss budget for each of the optical fiber at the operating optical wave-

length.

Connect

Maximum

Operating

Distance

2. Maximum distance can only be obtained when the UTP/STP cabling is

installed and verified to TIA/EIA 568A Commercial Building Telecommunica-

tions Cabling Standard.

AT-FS201 Dual ST 2 km

(1.24 mi)

RJ-45 100 m

(328 ft)

AT-FS202 Dual SC 2 km

(1.24 mi)

RJ-45 100 m

(328 ft)

AT-FS202SC/FS1 Dual SC 15 km

(9.4 mi)

RJ-45 100 m

(328 ft)

12 V D C

21 34

1222

PORT

100

HALF

FULL

OFF

DUPLEX

MODE

AUTO

NEG

SPEED

(Mbps)

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 87 88

Comments to this Manuals

No comments

Allied Telesis AT-FS201 Installation Guide Page 15

Comments to this Manuals

Related products and manuals for Network media converters Allied Telesis AT-FS201