Allied Telesis AT-GS950/16PS Installation Guide download pdf (Page 41)

AT-GS950/10PS, AT-GS950/16PS, and AT-GS950/48PS Switches Installation Guide

Cable Specifications

Table 9 contains the cable specifications for the twisted pair ports.

Note

The twisted pair ports on the switch feature auto-MDI when

operating at 10, 100, or 1000 Mbps. A port is configured as MDI or

MDI-X when it is connected to an end node. Consequently, you can

use a straight-through twisted pair cable when connecting any type

of network device to a port on the switch.

Table 9. Twisted Pair Cabling and Distances

Speed Type of Cable

Maximum

Operating

Distance

10 Mbps Standard TIA/EIA 568-B-compliant

Category 3 or better shielded or

unshielded cabling with 100 ohm

impedance and a frequency of 16

MHz.

100 m (328 ft)

100 Mbps Standard TIA/EIA 568-A-compliant

Category 5 or TIA/EIA 568-B-

compliant Enhanced Category 5

(Cat 5e) shielded or unshielded

cabling with 100 ohm impedance

and a frequency of 100 MHz.

100 m (328 ft)

1000 Mbps Standard TIA/EIA 568-A-compliant

Category 5 or TIA/EIA 568-B-

compliant Enhanced Category 5

(Cat 5e) shielded or unshielded

cabling with 100 ohm impedance

and a frequency of 100 MHz.

100 m (328 ft)

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 61 62

No comments

Allied Telesis AT-GS950/16PS Installation Guide Page 41