Allied Telesis AT-GS950/16PS Installation Guide download pdf (Page 44)

Chapter 2: Installation

Installing the Switch on a Desktop

You may install the switches on a desktop, in a standard 19-inch

equipment rack, or on a wall. To install the switch in a rack, see “Installing

the Switch in an Equipment Rack” on page 37. To install the switch on a

wall, see “Installing the Switch on a Wall” on page 39.

To place the switch on a desktop, perform the following procedure:

1. Remove all equipment from the package and store the packaging

material in a safe place.

2. Turn the switch over and place it on a table.

3. Attach the four rubber feet to the bottom of the switch as shown in

Figure 19.

Figure 19. Attaching the Rubber Feet

4. Turn the switch over again and place it on a flat, secure surface (such

as a desk or table) leaving ample space around the unit for ventilation.

5. Go to “Installing Optional SFP Transceivers” on page 42 or “Cabling

the Switch” on page 45.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 61 62

No comments

Allied Telesis AT-GS950/16PS Installation Guide Page 44