Allied-telesis AT-CV1000 User Manual download pdf (Page 35)

AT-CV1000 One-Slot Chassis Installation Guide

Powering On an AT-CV1000 Chassis

The AC power adapter for the AT-CV1000 chassis consists of two parts: a

power cord and a power adapter.

Note

The power adapter for the AT-CV1000 chassis is not used if the

chassis is installed in an AT-MCR12 rack-mount chassis.

Note

Use only power sources that are UL Listed (QQGQ or EPBU), TUV

Licensed or other Safety Agencies approved, and that are suitable

for country of use.

To power on an AT-CV1000 chassis, perform the following procedure:

1. Plug one end of the power cord into the socket on the power adapter,

plug the other end of the power cord into a power outlet, and plug the

pigtail cable on the power adapter into the power connector labeled

12VDC on the back of the converter, as shown in Figure 20.

Figure 20. Connecting the Power Adapter and Power Cord

12VDC

517

Plug into Wall Outlet

Plug Together

Plug In

Power Adapter

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 41 42

No comments

Allied-telesis AT-CV1000 User Manual Page 35