Allied-telesis AT-CV1000 User Manual download pdf (Page 37)

AT-CV1000 One-Slot Chassis Installation Guide

Installing a Blank Slot Cover

The AT-CV1000 chassis is shipped with the line card slot covered with the

AT-CV5PNL1 blank slot cover. When the line card slot is unoccupied, you

should cover it with a blank slot cover, to keep dust from getting into the

chassis and to maintain proper airflow, cooling, and ventilation throughout

the chassis.

Note

Allied Telesis strongly recommends that a blank slot cover be

inserted in the AT-CV1000 chassis when it does not contain a

functioning line card.

To install an AT-CV5PNL1 blank slot cover, perform the following

procedure:

1. Disconnect the cables from all the ports on the line card you are

removing from the chassis.

2. Cover the fiber optic port with the dust cap.

3. Remove the line card from the slot.

4. Align the back edge of the AT-CV5PNL1 blank slot cover with the left

and right alignment guides.

5. Slide the blank slot cover into the slot, as shown in Figure 21, until the

slot cover is flush with the front of the chassis.

Figure 21. Inserting an AT-CV5PNL1 Blank Slot Cover

CLA

LAS

PRO

DUC

-CV100

513

1 2 ... 32 33 34 35 36 37 38 39 40 41 42

No comments

Allied-telesis AT-CV1000 User Manual Page 37