Allied-telesis AT-MC605 User Manual download pdf (Page 36)

Overview

5. Go to “Cabling the Subscriber Unit” on page 36 to connect the cables

and to “Powering On the Subscriber Unit” on page 38 for powering the

unit.

Wall-Mounting

the Subscriber

Unit

The AT-MC605 VDSL Ethernet Extender may be wall mounted directly to

the wall with an AT-WLMT Wall Mount Bracket or by using an Allied

Telesis DINRAIL Bracket (both supplied separately) in conjunction with a

previously mounted DINRAIL.

1. Configure the right VDSL CONFIG switch (SCBR/PROV) to the SCBR

position as shown in Figure 7, ”Configuring AT-MC605 Ethernet

Extender for Subscriber Mode” on page 35.

2. Follow the installation instructions supplied with the wall mounting

bracket.

3. Go to “Cabling the Subscriber Unit” on page 36 to connect the cables

and to “Powering On the Subscriber Unit” on page 38 for powering the

unit.

Cabling the

Subscriber Unit

To cable the Subscriber unit to a computer or telephone, perform the

following steps:

1. To connect a computer to the AT-MC605 Ethernet Extender, connect

the ethernet cable from the AT-MC605 ethernet port to the ethernet

port on your computer, as shown in Figure 8 , ”Connecting AT-MC605

Ethernet Port to Computer”.

Figure 8. Connecting AT-MC605 Ethernet Port to Computer

LIN

-T

LNK/

NO LIMIT

SCBR

6dB

TE LIM

INTL

9dB

-MC605

VDSL EXTENDED ETHERNET

PRO

1558

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 47 48

No comments

Allied-telesis AT-MC605 User Manual Page 36