Allied-telesis AT-MC605 User Manual download pdf (Page 39)

AT-MC605 VDSL Ethernet Extender Installation Guide

Installing the AT-MC605 Ethernet Extender Provider Unit

The AT-MC605 Provider unit can either be installed in an AT-MCR12

rackmount chassis, or used as a desktop device, or mounted onto a wall.

Warning

To prevent exposure to electric shock, the AT-MC605 Provider Unit

must be installed in a RESTRICTED ACCESS LOCATION and

performed by QUALIFIED SERVICE PERSONNEL.

Note

For Finland, Norway, and Sweden – When the AT-MC605

Ethernet Extender and the AT-MCR12 rackmount chassis are used,

a permanent ground conductor must be installed on the AT-MCR12

rackmount chassis. For installation instructions of this ground

conductor, the AT-MCR12 Media Converter Rackmount Chassis

Installation Manual is available in portable document format (PDF)

on our web site at www.alliedtelesis.com.

Using the

Provider Unit on

a Desktop

To use the Provider unit on a desktop, perform the following procedure:

1. Remove all equipment from the package and store the packaging

material in a safe place.

2. Attach the four protective feet (provided) to each corner of the bottom

of the unit, as illustrated in Figure 12.

Figure 12. Attaching Protective Feet to the Provider Unit

1557

VDSL LINE

10Base-T/

100Base-TX

PHONE

LNK/ACT

100M

PWR

LINK

RATE

NO LIMITFASTSCBR 6dB

RATE LIMIT

INTL

PROV

9dB

AT-MC605

VDSL EXTENDED ETHERNET

VDSL CONFIG

PROV

SCBR

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 47 48

Comments to this Manuals

No comments

Allied-telesis AT-MC605 User Manual Page 39

Comments to this Manuals

Related products and manuals for Computer hardware Allied-telesis AT-MC605