AT-S81 Management Software User’s Guide
Section II: Web Browser Interface 257
Changing the Default SNMP Community Names
To configure the SNMP settings, perform the following procedure:
1. From the Basic Config menu, select SNMP Config.
The SNMP Configuration page opens, as shown in Figure 76.
Figure 76. SNMP Configuration Page
2. Click the SNMP Read Community field and type the name of the read
community.
The default is “public.”
3. Click the SNMP Write Community field and type the name of the write
community.
The default is “private.”
4. To set Trap Authentication for that community string, select Enable
or Disable from the list.
5. Click Apply.
Comments to this Manuals