Allied-telesis AT 8000/8POE User Manual download pdf (Page 141)

AT-S81 Management Software User’s Guide

Section I: Using the Menus Interface 141

3. From the Quality of Service Configuration Menu, type P to select Port

Priority Configuration.

The Port Priority Configuration Menu is shown in Figure 35.

Figure 35. Port Priority Configuration Menu

The columns in the menu display the following information:

Port

Displays the port number.

Trunk

Displays the trunk number if the port is a member of a trunk.

Traffic Class

The traffic class currently associated with the port.

Queue

Displays the number of the queue where untagged packets received

on the port are stored on the egress queue.

Override

Displays whether the priority level in ingress tagged frames is being

used or not. If No, the override is disabled and the port is using the

priority levels contained within the frames to determine the egress

queue. If Yes, the override is enabled and the tagged packets are

stored in the egress queue specified in the Queue column.

AT-8000/8POE Local Management System

Quality of Service Configuration -> Port Priority Configuration Menu

Port Trunk Traffic Class Queue Override

---- ----- ------------- ----- --------

1 --- 0 0 Disabled

2 --- 0 0 Disabled

3 --- 0 0 Disabled

4 --- 0 0 Disabled

5 --- 0 0 Disabled

6 --- 0 0 Disabled

7 --- 0 0 Disabled

8 --- 0 0 Disabled

9 --- 0 0 Disabled

3 : Highest

0 : Lowest

----------------------- <COMMAND> -----------------------------------------

Set T[r]affic Class Set [T]runk Traffic Class [Q]uit to previous menu

Set [O]verride Status Set Trun[k] Override Status

Command>

1 2 ... 136 137 138 139 140 141 142 143 144 145 146 ... 359 360

No comments

Allied-telesis AT 8000/8POE User Manual Page 141