Allied-telesis AT 8000/8POE User Manual download pdf (Page 40)

Chapter 3: Basic Switch Parameters

40 Section I: Using the Menus Interface

The Telnet UI idle time out parameter specifies the length of time a

remote Telnet management session can be inactive before the

management software automatically ends it. This feature prevents

unauthorized individuals from configuring the switch if you leave

your management workstation unattended.

This parameter applies to a local management session but not to a

remote SNMP or web management session. An SNMP

management session remains active as long as the network

management application is active. A web browser management

session remains active as long as your web browser is open.

5. To change the AT-S81 management login user name, do the

following:

a. Type N to select Change Administrator User Name.

The following prompt is displayed:

Enter current password>

b. Enter the current login password. The management software

prompts you for the password to prevent an unauthorized

individual from changing the login name.

c. Enter the new user name. The default name is “manager.” The

name can be from 0 to 12 characters. Spaces are allowed. The

deletes the current login name without assigning a new one.

The new user name appears in the User Field in the top portion of

the menu. You must use the new login user name the next time

you start a local or web browser management session.

6. To change the manager login password, do the following:

a. Type P to select Change Administrator Password.

The following prompt is displayed:

Enter old password>

b. Enter the current manager password.

The following prompt is displayed:

Enter new password>

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 359 360

No comments

Allied-telesis AT 8000/8POE User Manual Page 40