Allied-telesis AT 8000/8POE User Manual download pdf (Page 39)

AT-S81 Management Software User’s Guide

Section I: Using the Menus Interface 39

The SNMP option is described in “Enabling or Disabling the SNMP

Agent” on page 74.

The RADIUS Server Configuration option is described Chapter 14,

“RADIUS Authentication Protocol” on page 189.

3. To configure the console UI idle time out parameter, do the following:

a. Type C to select Set Console UI Time Out.

The following prompt is displayed:

Enter console idle timeout>

b. Enter a number for the timeout value. The range is 0 to 60 minutes,

and the default is 5 minutes. A timeout value to 0 causes the switch

to never time out a local management session.

The console UI idle time out parameter specifies the length of time

a local management session can be inactive before the

management software automatically ends it. This feature prevents

unauthorized individuals from configuring the switch if you leave

your management workstation unattended.

This parameter applies to a local management session but not to a

remote SNMP or web management session. An SNMP

management session remains active as long as the network

management application is active. A web browser management

session remains active as long as your web browser is open.

Note

If you select 0, you must always remember to properly log off from a

local management session when you are finished to prevent

blocking future management sessions with the switch.

4. To configure the Telnet UI idle time out parameter, do the following:

a. Type T to select Set Telnet UI Time Out.

The following prompt is displayed:

Enter console idle timeout>

b. Enter a number for the timeout value. The range is 0 to 60 minutes,

and the default is 5 minutes. A timeout value to 0 causes the switch

to never timeout a local management session.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 359 360

No comments

Allied-telesis AT 8000/8POE User Manual Page 39