Allied Telesis AT-x230-10GP Installation Guide download pdf (Page 16)

Chapter 1: Overview

Features

This section describes the hardware features of the AT-x230-10GP and

AT-x230-18GP Gigabit Ethernet Switches.

Twisted pair

ports

Here are the basic features of the 10/100/1000Mbps twisted-pair ports:

 8 or 16 PoE ports per switch

 10BASE-T (IEEE 802.3i), 100BASE-TX (IEEE 802.3u) and

1000BASE-T (IEEE 802.3ab) compliant

 IEEE 802.3u Auto-Negotiation compliant

 Auto-MDI/MDIX

 PoE Plus

 Full wire-speed non-blocking

 IEEE 802.3x Flow Control in 10BASE-T/100BASE-TX full-duplex

operation

 IEEE 802.3x Back Pressure in 10BASE-T/100BASE-TX half-

duplex operation

 IEEE803.3z 1000BASE-T Flow Control

 Support for jumbo packets up to 10KB

 One RJ45 connector on front panel for RS232 console purposes.

SFP slots Each switch has two SFP ports on the front panel. The ports are available

for 100Mbps or 1000Mbps of fiber, and 1000Mbps of copper, and support

100BASE-FX and 1000BASE-SX/LX transceivers. You need to purchase

SFP transceivers separately. For a list of supported transceivers, contact

your Allied Telesis distributor or reseller.

Note

See the product data sheets for the specific ATI SFP modules

supported by the x230 Series Switches.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 79 80

No comments

Allied Telesis AT-x230-10GP Installation Guide Page 16