Allied Telesis AT-x230-10GP Installation Guide download pdf (Page 69)

AT-x230-10GP and AT-x230-18GP Switches Installation Guide

Installing optional SFP transceivers

To install an SFP transceiver, perform the following procedure:

Note

The transceiver can be hot-swapped; you do not need to power off

the switch to install a transceiver. However, always remove the

cables before removing the transceiver.

Note

You should always install the transceiver before connecting the fiber

optic cables to it.

1. Remove the transceiver from its shipping container and store the

packaging material in a safe location.

Warning

An SFP transceiver can be damaged by static electricity. Be sure to

observe all standard electrostatic discharge (ESD) precautions,

such as wearing an antistatic wrist strap, to avoid damaging the

transceiver.

2. Remove the dust plug from an SFP slot. See Figure 29.

FIGURE 29. REMOVING THE DUST PLUG FROM AN SFP SLOT

SFP

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 79 80

No comments

Allied Telesis AT-x230-10GP Installation Guide Page 69