Allied Telesis AT-x230-10GP Installation Guide download pdf (Page 34)

Chapter 1: Overview

Table 5 describes the functions of the FAULT LED for the AT-x230-10GP

and AT-x230-18GP switches.

ABLE 5. AT-X230-10GP AND AT-X230-18GP FAULT LED FUNCTIONAL

DESCRIPTIONS

LED State Description

The switch is receiving AC input power and is

opera

ting normally

Indicates fan failure

Indicates the switch’s temperature has

exceede

d the threshold

10/1000BASE-T/

100BASE-TX

Link/Activity/

Speed LED and

PoE status LED

The Link/Activity/Speed and PoE LEDs provide information about the 10/

1000BASE-T and the 100BASE-TX ports.

The AT-x230-10GP and AT-x230-18GP switches indicate Link/Activity/

Speed and PoE status with two LEDs for each port (Figure 9 and Figure

10). For each port:

 the left LED corresponds to Link/Activity/Speed

 the right LED corresponds to PoE status

Note

All of the port LEDs are OFF when the switch is operating in the low

power mode. To toggle on the LEDs, use the ecofriendly button. See

“ecofriendly button” on page 30 for more information.

FAULT

Off

Red

flashing

once

Red

fla

shing six

times

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 79 80

No comments

Allied Telesis AT-x230-10GP Installation Guide Page 34