Allied Telesis AT-8000GS User's Guide download pdf (Page 105)

Configuring System Logs

Page 105

• IP Address — Displays the defined IP address of the syslog server.

• Minimum Severity — Indicates the defined minimum severity level.

• Description — Provides additional information about the syslog server.

Clearing Event Logs

To clear all events from the log:

1. Click System > Event Log. The Event Log Page opens:

2. Click Clear Logs. The stored logs are cleared. If logging is enabled, the system begins to log new events.

Adding Log Servers

To add a log server:

1. Click System > Event Log. The Event Log Page opens.

2. Select a Log Type in the Configure Log Outputs table’

3. Click Add. The Add Syslog Page opens:

Figure 78: Add Syslog Page

The Add Syslog Page contains the following fields:

• Log Server IP Address — Defines the IP address of the syslog server.

• Description — Provides any additional information about the syslog server, for example its location.

• UDP Port — Defines the UDP port to which the server logs are sent. The possible range is 1-65535.

The default value is 514.

• Minimum Severity — Indicates the minimum severity level to be included in the log output. All logs that have

the severity higher than the minimum severity are also included in the output. When the minimum severity

level is defined, logs of all higher severity levels are selected automatically.

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 204 205

No comments

Allied Telesis AT-8000GS User's Guide Page 105