Allied Telesis AT-8000GS User's Guide download pdf (Page 150)

Configuring SNMP

Page 150

To add an SNMP notification filter:

1. Click the Add button. The Add SNMP Notification Filter Page opens:

Figure 114: Add SNMP Notification Filter Page

The Add SNMP Notification Filter Page contains the following fields:

• Filter Name — Contains a list of user-defined notification filters.

• Subtree ID Tree — Displays the OID for which notifications are sent or blocked. If a filter is attached to an

OID, traps or informs are generated and sent to the trap recipients. Object IDs are selected from either the

Select from List or the Object ID field. there are two configuration options:

– Select from List — Select the OID from the list provided. Pressing the Up and Down buttons allows you

to change the priority by moving the selected subtree up or down in the list.

– Object ID — Enter an OID not offered in the Select from List option.

• Filter Type — Indicates whether informs or traps are sent regarding the OID to the trap recipients.

– Excluded — Restricts sending OID traps or informs.

– Included — Sends OID traps or informs.

2. Define the relevant fields.

3. Click Apply. The SNMP Notification Filter is added to the list, and the device is updated.

4. Click Save Config on the menu to save the changes permanently.

1 2 ... 145 146 147 148 149 150 151 152 153 154 155 ... 204 205

No comments

Allied Telesis AT-8000GS User's Guide Page 150